Skip to Main Content
 

Global Search Box

 
 
 
 

ETD Abstract Container

Abstract Header

ABAQUS Implementation of Creep Failure in Polymer Matrix Composites with Transverse Isotropy

Ouyang, Fengxia

Abstract Details

2005, Master of Science, University of Akron, Civil Engineering.
Polymer Matrix Composites (PMC) are increasingly favored in structural applications for their light weight and durability. However, the numerical modeling of these materials poses several challenges. This is primarily due to the highly anisotropic nature of the creep exhibited by these materials above the glass transition temperature. Also, the damage and failure of the material is of particular interest to designers using the PMCs. Recently, a sustained effort has been to provide the designer with large computer codes containing comprehensive constitutive equations, often equipped with large number of internal variables and with the most general mathematical forms, for use in structural design analysis. Although elegant and useful, such constitutive laws are often expensive in implementation. Specially for early stages of the design, a quicker way of estimating complicated PMC behavior is needed. In this work, the constitutive material law by Robinson and Binienda (2001) [1,2] is utilized for such an approach. The model is successful in describing polymer matrix composite (PMC) materials having long or continuous reinforcement fibers embedded in a polymer matrix. Although the material law includes a single scalar parameter to describe the damage, it retains the essential material behavior. The material law is implemented computationally as a user defined subroutine (UMAT) in a commercially available FEA code (ABAQUS). The material parameters are obtained from experiments of thin-walled tubular specimens reinforced with unidirectional, helical fibers at an angle , and under tensile and shear loading . The model correctly predicts the relation between logarithmic creep rate and logarithmic stress. The user subroutine has robust convergence properties. The creep strain rate and the effect of damage on the creep strain rate are presented for the benchmark problem of a square plate with a circular hole at the center and pressure vessel. The effect of fiber orientation on the durability of the square plate and pressure vessel under damaging loads, is studied.
Wieslaw Binienda (Advisor)
90 p.

Recommended Citations

Citations

  • Ouyang, F. (2005). ABAQUS Implementation of Creep Failure in Polymer Matrix Composites with Transverse Isotropy [Master's thesis, University of Akron]. OhioLINK Electronic Theses and Dissertations Center. http://rave.ohiolink.edu/etdc/view?acc_num=akron1131898124

    APA Style (7th edition)

  • Ouyang, Fengxia. ABAQUS Implementation of Creep Failure in Polymer Matrix Composites with Transverse Isotropy. 2005. University of Akron, Master's thesis. OhioLINK Electronic Theses and Dissertations Center, http://rave.ohiolink.edu/etdc/view?acc_num=akron1131898124.

    MLA Style (8th edition)

  • Ouyang, Fengxia. "ABAQUS Implementation of Creep Failure in Polymer Matrix Composites with Transverse Isotropy." Master's thesis, University of Akron, 2005. http://rave.ohiolink.edu/etdc/view?acc_num=akron1131898124

    Chicago Manual of Style (17th edition)