Skip to Main Content
 

Global Search Box

 
 
 
 

Files

File List


case1133365793.pdf (20.9 MB)

ETD Abstract Container

Abstract Header

Tribological Thin Films on Steel Rolling Element Bearing Surfaces

Evans, Ryan David
http://rave.ohiolink.edu/etdc/view?acc_num=case1133365793

Abstract Details

2006, Doctor of Philosophy, Case Western Reserve University, Chemical Engineering.
Tribological thin films are of interest to designers and end-users of friction management and load transmission components such as steel rolling element bearings. This study sought to reveal new information about the properties and formation of such films, spanning the scope of their technical evolution from natural oxide films, to antiwear films from lubricant additives, and finally engineered nanocomposite metal carbide/amorphous hydrocarbon (MC/a-C:H) films. Transmission electron microscopy (TEM) was performed on the near-surface material (depth < 500 nm) of tapered roller bearing inner rings (cones) that were tested at two levels of boundary-lubricated conditions in mineral oil with and without sulfur- and phosphorus-containing gear oil additives. Site-specific thinning of cross-section cone surface sections for TEM analyses was conducted using the focused ion beam milling technique. Two types of oxide surface films were characterized for the cones tested in mineral oil only, each one corresponding to a different lubrication severity. Continuous and adherent antiwear films were found on the cone surfaces tested with lubricant additives, and their composition depended on the lubrication conditions. A sharp interface separated the antiwear film and base steel. Various TEM analytical techniques were used to study the segregation of elements throughout the film volume. The properties of nanocomposite tantalum carbide/amorphous hydrocarbon (TaC/a-C:H) thin films depend sensitively on reactive magnetron sputtering deposition process conditions. TaC/a-C:H film growth was studied as a function of three deposition parameters in designed experiments: acetylene flow rate, applied d.c. bias voltage, and substrate carousel rotation rate. Empirical models were developed for the following film characteristics to identify process-property trend relationships: Ta/C atomic ratio, hydrogen content, film thickness, TaC crystallite size, Raman spectrum, compressive stress, hardness, and elastic modulus. TEM measurements revealed the film base structure consisted of equiaxed cubic B1-TaC crystallites (< 5 nm) suspended in an a-C:H matrix. At the nanometer-scale, the film structure was lamellar with alternating TaC- and a-C:H-rich layers, the periodicity and distinctness of which were affected by deposition factors. The empirical property trends were interpreted with hypothesized growth mechanisms that incorporate elements of physical vapor deposition and plasma-enhanced chemical vapor deposition.
Jeffrey Glass (Advisor)
220 p.
thin film; tribology; transmission electron microscopy; physical vapor deposition; plasma-enhanced chemical vapor deposition; lubricant additives

Recommended Citations

Citations

  • Evans, R. D. (2006). Tribological Thin Films on Steel Rolling Element Bearing Surfaces [Doctoral dissertation, Case Western Reserve University]. OhioLINK Electronic Theses and Dissertations Center. http://rave.ohiolink.edu/etdc/view?acc_num=case1133365793

    APA Style (7th edition)

  • Evans, Ryan. Tribological Thin Films on Steel Rolling Element Bearing Surfaces. 2006. Case Western Reserve University, Doctoral dissertation. OhioLINK Electronic Theses and Dissertations Center, http://rave.ohiolink.edu/etdc/view?acc_num=case1133365793.

    MLA Style (8th edition)

  • Evans, Ryan. "Tribological Thin Films on Steel Rolling Element Bearing Surfaces." Doctoral dissertation, Case Western Reserve University, 2006. http://rave.ohiolink.edu/etdc/view?acc_num=case1133365793

    Chicago Manual of Style (17th edition)

case1133365793
1,562
© 2005, all rights reserved.
This open access ETD is published by Case Western Reserve University School of Graduate Studies and OhioLINK.