Skip to Main Content
 

Global Search Box

 
 
 
 

Files

ETD Abstract Container

Abstract Header

Design, Control, and Optimization of Robots with Advanced Energy Regenerative Drive Systems

Abstract Details

2019, Doctor of Philosophy in Engineering, Cleveland State University, Washkewicz College of Engineering.
We investigate the control and optimization of robots with ultracapacitor based regenerative drive systems. A subset of the robot joints are conventional, in the sense that external power is used for actuation. Other joints are energetically self-contained passive systems that use ultracapacitors for energy storage. An electrical interconnection known as the star configuration is considered for the regenerative drives that allows for direct electric energy redistribution among joints, and enables higher energy utilization efficiencies. A semi-active virtual control strategy is used to achieve control objectives. We find closed-form expressions for the optimal robot and actuator parameters (link lengths, gear ratios, etc.) that maximize energy regeneration between any two times, given motion trajectories. In addition, we solve several trajectory optimization problems for maximizing energy regeneration that admit closed-form solutions, given system parameters. Optimal solutions are shown to be global and unique. In addition, closed-form expressions are provided for the maximum attainable energy. This theoretical maximum places limits on the amount of energy that can be recovered. Numerical examples are provided in each case to demonstrate the results. For problems that don't admit analytical solutions, we formulate the general nonlinear optimal control problem, and solve it numerically, based on the direct collocation method. The optimization problem, its numerical solution and an experimental evaluation are demonstrated using a PUMA manipulator with custom regenerative drives. Power flows, stored regenerative energy and efficiency are evaluated. Experimental results show that when following optimal trajectories, a reduction of about 10-22% in energy consumption can be achieved. Furthermore, we present the design, control, and experimental evaluation of an energy regenerative powered transfemoral prosthesis. Our prosthesis prototype is comprised of a passive ankle, and an active regenerative knee joint. A novel varying impedance control approach controls the prosthesis in both the stance and swing phase of the gait cycle, while explicitly considering energy regeneration. Experimental evaluation is done with an amputee test subject walking at different speeds on a treadmill. The results validate the effectiveness of the control method. In addition, net energy regeneration is achieved while walking with near-natural gait across all speeds.
Hanz Richter (Advisor)
Dan Simon (Committee Member)
Eric Schearer (Committee Member)
Antonie van den Bogert (Committee Member)
Ulrich Zurcher, (Committee Member)
173 p.

Recommended Citations

Citations

  • KHALAF, P. (2019). Design, Control, and Optimization of Robots with Advanced Energy Regenerative Drive Systems [Doctoral dissertation, Cleveland State University]. OhioLINK Electronic Theses and Dissertations Center. http://rave.ohiolink.edu/etdc/view?acc_num=csu1552923998768344

    APA Style (7th edition)

  • KHALAF, POYA. Design, Control, and Optimization of Robots with Advanced Energy Regenerative Drive Systems. 2019. Cleveland State University, Doctoral dissertation. OhioLINK Electronic Theses and Dissertations Center, http://rave.ohiolink.edu/etdc/view?acc_num=csu1552923998768344.

    MLA Style (8th edition)

  • KHALAF, POYA. "Design, Control, and Optimization of Robots with Advanced Energy Regenerative Drive Systems." Doctoral dissertation, Cleveland State University, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=csu1552923998768344

    Chicago Manual of Style (17th edition)