Skip to Main Content
 

Global Search Box

 
 
 

ETD Abstract Container

Abstract Header

Novel High Frequency Electromagnetic Shielding Measurements Within Functional Geometries Using Non-Metal and Fatigued Conductors

Abstract Details

2017, Doctor of Philosophy (Ph.D.), University of Dayton, Materials Engineering.
The purpose of this research was to develop novel nanoparticle-enabled material shields and conductors for use in electrical coaxial cables, and to create appropriate methods to characterize their response to high frequency electromagnetic fields. In addition, techniques to distinguish the effects of mechanical degradation on electrical properties were developed. Traditional electrical measurements methods are ineffectual to such characterization due to limitations with frequency range, sample geometry, field impingement, and false assumptions of field coupling to non-metal center conductors. In this study, a reverberation chamber was used to develop a novel measurement method using conduction characterizations from a network analyzer. Samples were fatigued to identify the effects of heavy use and mechanical degradation on shielding effectiveness and system characterization, including impedance, voltage standing wave ratio, return loss, and insertion loss. The novel measurement of shielding effectiveness as well as system characterizations was used to determine the effect of material properties on cabling functionality, both electrical and mechanical and their inter-relationship. The results showed that the combination of carbon nanotube yarn center conductors and carbon nanotube tape shields led to more signal attenuation and therefore much higher characteristic impedance. Utilizing the novel method to measure the shielding effectiveness allowed for the incorporation of these differences in power transmission while simultaneously analyzing the immunity of the three-dimensional shield within a high frequency field. The carbon nanotube tape shields provided lightweight and efficient shielding at higher frequencies (towards 5 GHz) due to a decreasing skin depth at higher frequencies. A braid architecture, that which was incorporated in the silver coated copper clad steel shield, proved to withstand mechanical fatigue better, while the carbon nanotube helical tape began to stretch apart. This was because the braid better axially supported the load and began to tighten, reducing the size of apertures in many instances. Though it is possible for the conductivity of carbon nanotube bulk materials to improve due to fatigue or tension, no over-arching trends were observed to have an effect of shielding post fatigue.
Donald Klosterman, Ph.D. (Advisor)
185 p.

Recommended Citations

Citations

  • White, A. (2017). Novel High Frequency Electromagnetic Shielding Measurements Within Functional Geometries Using Non-Metal and Fatigued Conductors [Doctoral dissertation, University of Dayton]. OhioLINK Electronic Theses and Dissertations Center. http://rave.ohiolink.edu/etdc/view?acc_num=dayton1501765571693941

    APA Style (7th edition)

  • White, Ashley. Novel High Frequency Electromagnetic Shielding Measurements Within Functional Geometries Using Non-Metal and Fatigued Conductors. 2017. University of Dayton, Doctoral dissertation. OhioLINK Electronic Theses and Dissertations Center, http://rave.ohiolink.edu/etdc/view?acc_num=dayton1501765571693941.

    MLA Style (8th edition)

  • White, Ashley. "Novel High Frequency Electromagnetic Shielding Measurements Within Functional Geometries Using Non-Metal and Fatigued Conductors." Doctoral dissertation, University of Dayton, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=dayton1501765571693941

    Chicago Manual of Style (17th edition)