Skip to Main Content
 

Global Search Box

 
 
 
 

Files

File List


osu1100721824.pdf (1.26 MB)

ETD Abstract Container

Abstract Header

Analysis of in-cavity thermal and pressure characteristics in aluminum alloy die casting

Venkatasamy, Vasanth Kumar
http://rave.ohiolink.edu/etdc/view?acc_num=osu1100721824

Abstract Details

1996, Master of Science, Ohio State University, Industrial and Systems Engineering.
The lack of effective control of the die casting process is the primary reason for the occurrence of defective die cast products. A reliable process control system must be capable of measuring the process variables, comparing them to the standard or ideal values and making suitable alterations in the process to eliminate any deviation from the ideal. This study attempted to facilitate the development of such a process control system. A two pronged approach was used to achieve this objective. The experimental approach addressed some of the problems in the measurement of process variables. The analytical approach addressed some of the problems in the design of the process and subsequent identification of the ideal process variable values. The experimental approach concentrated on the measurement of in-cavity pressure and thermal characteristics of the die casting process. Kistler direct pressure sensors were evaluated and utilized for cavity pressure measurement during the die casting campaign...
Jerald Brevick (Advisor)
90 p.
DIE CASTING; initial die; freezing time; die surface temperatures

Recommended Citations

Citations

  • Venkatasamy, V. K. (1996). Analysis of in-cavity thermal and pressure characteristics in aluminum alloy die casting [Master's thesis, Ohio State University]. OhioLINK Electronic Theses and Dissertations Center. http://rave.ohiolink.edu/etdc/view?acc_num=osu1100721824

    APA Style (7th edition)

  • Venkatasamy, Vasanth. Analysis of in-cavity thermal and pressure characteristics in aluminum alloy die casting. 1996. Ohio State University, Master's thesis. OhioLINK Electronic Theses and Dissertations Center, http://rave.ohiolink.edu/etdc/view?acc_num=osu1100721824.

    MLA Style (8th edition)

  • Venkatasamy, Vasanth. "Analysis of in-cavity thermal and pressure characteristics in aluminum alloy die casting." Master's thesis, Ohio State University, 1996. http://rave.ohiolink.edu/etdc/view?acc_num=osu1100721824

    Chicago Manual of Style (17th edition)

osu1100721824
7,819
© 1996, all rights reserved.
This open access ETD is published by The Ohio State University and OhioLINK.