Skip to Main Content
 

Global Search Box

 
 
 
 

Files

File List


19742.pdf (5.9 MB)

ETD Abstract Container

Abstract Header

The Electrocatalytic Behavior of Electrostatically Assembled Hybrid Carbon-Bismuth Nanoparticle Electrodes for Energy Storage Applications

Sankar, Abhinandh
http://rave.ohiolink.edu/etdc/view?acc_num=ucin1459165533

Abstract Details

2016, PhD, University of Cincinnati, Engineering and Applied Science: Chemical Engineering.
Electrostatic Layer-by-Layer (LbL) assembly of nanoplatelets of stacked graphene sheets and bismuth metal nanoparticles having negative surface charge on cationic polymer binder was investigated as an electrode fabrication method. The bismuth nanoparticles were synthesized utilizing a novel aqueous-based autoreduction scheme wherein SnCl2serves as both reducing and stabilizing agent. Correlation of well-defined electrode nanostructure to fundamental electrocatalytic activity was evaluated using Scanning Electron Microscopy (SEM), Energy-Dispersive Spectroscopy (EDS), Rotating Disk Electrode (RDE), Cyclic Voltammetry (CV), and Electrochemical Impedance Spectroscopy (EIS). LbL assembly was found to be a facile method of obtaining large electrochemically active mass-specific surface areas for the positive VO2+/VO 2+ and the negative V3+/V 2+ redox reactions crucial to Vanadium Redox Flow Battery (VRFB) application for large-scale energy storage. Redox exchange currents obtained using RDE were found to increase with the number of carbon nanoplatelet layers deposited. This process thereby provides a convenient means by which energy storage can be systematically scaled to differing power requirements. LbL assemblies for the positive VO 2+/VO 2+ electrode consisted of horizontally oriented stacked graphene nanoplatelets deposited onto cationic polymer binder that yielded a constant exchange current density, i0, of 3.36 mA cm-2 per layer. Nanoplatelet agglomeration did not impact the electrochemically active area with the deposition of successive layers. In the case of the negative V 3+/V 2+ redox reaction, layered structures consisted of co-adsorbed bismuth metal and stacked graphene nanoplatelets in horizontal orientations exhibited i 0 that increased from 35.81 mA cm-2 for 4 layers to 52.63 mA cm-2 for 20 layers. Increasing CV currents at peak potential with number of layers were also observed on more commercially viable bipolar substrate materials. Identically oriented structures to those on glassy carbon substrates yielded a constant peak mass-specific CV current of 135 A g-1 for the positive VO 2+/VO 2+ electrode obtained at a scan rate of 0.05 V s-1. In the case of negative V3+/V 2+ redox reaction, the peak current increased from 20 mA cm-2 to 55 mA cm-2 when Bi was incorporated into the electrode nanostructure. Separation of the onset potential of the hydrogen evolution reaction (HER) from that of the V 3+/V 2+ redox couple was found to be the mechanism by which such high activities were obtained using these hybrid nanostructures. The LbL assemblies were also found to be exceptionally durable. Negligible loss in activity was observed over 100 electrochemical cycles from -1.1 V (vs Ag/AgCl) to 1.2 V (vs Ag/AgCl). Pseudocapacitive behavior of Bi 2 O 3-based graphite thin-film structures was also evaluated for asymmetric electrode-type supercapacitor conditions. The area-specific capacitance improved linearly with increasing number of hybrid nanoparticle layers (stacked graphene sheets with incorporated Bi nanoparticles) on graphene substrates. Correspondingly, a nearly-constant mass-specific capacitance was observed at different applied current densities for all electrode assemblies recorded at same electrolyte conditions. Typical values obtained for the mass-specific capacitances were 550, 485, and 410 F g-1 at current densities of 1, 2 and 4 A g-1, respectively. This result provides an increase of two orders of magnitude over alternate approaches that do not employ LbL assembly.
Anastasios Angelopoulos, Ph.D. (Committee Chair)
Junhang Dong, Ph.D. (Committee Member)
Sundaram Murali Meenakshi, Ph.D. (Committee Member)
Vesselin Shanov, Ph.D. (Committee Member)
203 p.
Chemical Engineering
Energy Storage; Electrode fabrication; Graphene; Nanostructures; Supercapacitors; Vanadium Redox Flow Battery

Recommended Citations

Citations

  • Sankar, A. (2016). The Electrocatalytic Behavior of Electrostatically Assembled Hybrid Carbon-Bismuth Nanoparticle Electrodes for Energy Storage Applications [Doctoral dissertation, University of Cincinnati]. OhioLINK Electronic Theses and Dissertations Center. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1459165533

    APA Style (7th edition)

  • Sankar, Abhinandh. The Electrocatalytic Behavior of Electrostatically Assembled Hybrid Carbon-Bismuth Nanoparticle Electrodes for Energy Storage Applications. 2016. University of Cincinnati, Doctoral dissertation. OhioLINK Electronic Theses and Dissertations Center, http://rave.ohiolink.edu/etdc/view?acc_num=ucin1459165533.

    MLA Style (8th edition)

  • Sankar, Abhinandh. "The Electrocatalytic Behavior of Electrostatically Assembled Hybrid Carbon-Bismuth Nanoparticle Electrodes for Energy Storage Applications." Doctoral dissertation, University of Cincinnati, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1459165533

    Chicago Manual of Style (17th edition)

ucin1459165533
362
© 2016, all rights reserved.
This open access ETD is published by University of Cincinnati and OhioLINK.