Skip to Main Content
 

Global Search Box

 
 
 
 

Files

File List


wright1135882817.pdf (12.88 MB)

ETD Abstract Container

Abstract Header

Nano-Coatings on Carbon Structures for Interfacial Modification

Pulikollu, Rajasekhar Venkata
http://rave.ohiolink.edu/etdc/view?acc_num=wright1135882817

Abstract Details

2005, Doctor of Philosophy (PhD), Wright State University, Engineering PhD.
Pulikollu, Rajasekhar Venkata. Ph.D., Department of Mechanical and Materials Engineering, Wright State University, 2005. Nano-coatings on Carbon Structures for Interfacial Modification. Surface modification of materials is a rapidly growing field as structures become smaller, more integrated and complex. It opens up the possibility of combining the optimum bulk properties of a material with optimized surface properties such as enhanced bonding, corrosion resistance, reactivity, stress transfer, and thermal, optical or electrical behavior. Therefore, surface functionalization or modification can be an enabling step in a wide variety of modern applications. In this dissertation several surface modification approaches on carbon foam and carbon nano-fibers will be discussed. These are recently developed sp 2 graphitic carbon based structures that have significant potential in aerospace, automotive and thermal applications. Influence of surface modification on composite formation and properties have also been investigated. Two types of property changes have been investigated: one for enhancing the surface reactivity and another for surface inertness. Characterization techniques such as X-ray Photoelectron Spectroscopy (XPS), Atomic Force Microscopy (AFM), Contact Angle Measurement, Scanning Electron Microscope (SEM), Transmission Electron Microscope(TEM), and mechanical testing are used in this study to find out the influence of these coatings on surface composition, chemistry, and morphology. Mechanical testing has been performed on composites and stand-alone foam to study the influence of surface modification on physical and mechanical properties of the composite materials. The effectiveness of these coatings on metallic/graphite interface has also been investigated for metal-matrix composite related applications. Additionally, the influence of plasmacoatings on nucleation and growth of nanotubes on larger carbon structures (to produce multiscale, multifunctional materials) have also been studied. It is seen that the liquid phase activation treatment introduces oxygen functional groups on the surface, but may cause severe enough degradation that damages the ligaments and cell walls of carbon foam. This results in higher elastic modulus but lower strength. So, to get any benefit from such approaches the optimization window may be very narrow and marginal in controllability. An alternative solution would be to synthesize ultra thin film coatings without etching the surfaces. It is observed that plasma assisted coatings having thickness in the range of few nanometers (4-5nm) are completely covering the graphite substrates. The coating surface, chemistry, and morphology information is based upon XPS and AFM studies on pyrolytic graphite substrate. Two types of plasma surface modification techniques have been attempted: one is to make the surface more reactive for structural components and the other is to make the surface more inert for stand-alone structures. In order to achieve these goals, plasma assisted oxide and fluorocarbon coatings are studied in detail. The synthesized oxide and fluorocarbon coating chemistries are comparable to conventional silica (SiO2) and polytetrafluoroethylene (PTFE, –CF2-). It is seen that the fluorocarbon coatings provide moisture resistance to graphitic foam by making the surface inert at the nanometer scale. On the other hand, plasma assisted oxidecoating is a feasible and effective means of improving the wettability and dispersion of foam and nanofibers in organic polymer matrix material. Surface analysis as well as microstructural studies and mechanical tests have shown encouraging results. The interface reactions between graphite (coated and uncoated) and epoxy have also been studied in detail. Nano-scale plasma coatings have also been applied for metal matrix composites and semiconductor related applications. The fluorocarbon coating promotes delamination/exfoliation of the metal on graphite, hence may be used for patterning or lithography. Oxide coatings seem to enhance the adhesion and metallic diffusion between graphite and metal, hence can be used for the development of metalmatrix composites. Additionally, oxide coating seems to enhance the length and density of nanotubes synthesized on carbon structures, desired for the design of advanced nano-composites.
Sharmila Mukhopadhyay (Advisor)
193 p.
Engineering, Materials Science
Nano-coatings; carbon foam; nanofibers; nanotubes; surface modification of materials; plasma-assisted oxide coatings; plasma-assisted fluorocarbon coatings; interfacial bonding; carbon-core polymer and metal matrix composites; metallization.

Recommended Citations

Citations

  • Pulikollu, R. V. (2005). Nano-Coatings on Carbon Structures for Interfacial Modification [Doctoral dissertation, Wright State University]. OhioLINK Electronic Theses and Dissertations Center. http://rave.ohiolink.edu/etdc/view?acc_num=wright1135882817

    APA Style (7th edition)

  • Pulikollu, Rajasekhar. Nano-Coatings on Carbon Structures for Interfacial Modification. 2005. Wright State University, Doctoral dissertation. OhioLINK Electronic Theses and Dissertations Center, http://rave.ohiolink.edu/etdc/view?acc_num=wright1135882817.

    MLA Style (8th edition)

  • Pulikollu, Rajasekhar. "Nano-Coatings on Carbon Structures for Interfacial Modification." Doctoral dissertation, Wright State University, 2005. http://rave.ohiolink.edu/etdc/view?acc_num=wright1135882817

    Chicago Manual of Style (17th edition)

wright1135882817
4,590
© 2005, all rights reserved.
This open access ETD is published by Wright State University and OhioLINK.