Skip to Main Content
 

Global Search Box

 
 
 

ETD Abstract Container

Abstract Header

Fabrication and Characterizations of LAGP/PEO Composite Electrolytes for All Solid-State Lithium-Ion Batteries

Lee, Jeremy J.
http://rave.ohiolink.edu/etdc/view?acc_num=wright1527273235003087

Abstract Details

2018, Master of Science in Renewable and Clean Energy Engineering (MSRCE), Wright State University, Mechanical Engineering.
With the rise of electric vehicles and increasing dependence on mobile electronics, the demands for lithium-ion batteries have followed in tandem for their high energy and power densities. However, traditional lithium-ion batteries consisting of liquid electrolytes have limited operating temperatures and are susceptible to ignition and subsequent fires. Recently, battery research has diverged into solid state chemistry to address the aforementioned issues. In this research, we systematically investigate a series of ceramic/polymer lithium-ion conducting composite electrolytes, i.e. Li1.4Al0.4Ge1.6(PO4)3 /lithiated polyethylene oxide (LAGP/PEO). Lithiated PEO was prepared with two different lithium salts, LiBF4 and LITFSI. The impacts of the LAGP on the electrical, thermal, and mechanical properties of the two lithiated PEO systems are assessed. When LAGP is homogenously distributed in PEO-LiTFSI films, ionic conductivities and thermal properties remain relatively uninhibited; the elastic modulus and ultimate strength increased up to 450% and 200%, respectively. When LAGP was added to PEO-LiBF4 films, it increased the elastic strength nearly 200% without compromising the ultimate strength and thermal properties, but at the sacrifice of ionic conductivity. The ceramic/polymeric electrolytes have potential applications to flexible all solid state lithium-ion batteries.
Hong Huang, Ph.D. (Committee Chair)
James Menart, Ph.D. (Committee Member)
Thomas Howell, Ph.D. (Committee Member)
Michael Rottmayer, Ph.D. (Committee Member)
133 p.
Alternative Energy; Energy; Engineering; Materials Science; Solid State Physics; Technology
Lithium-ion; battery; solid-state-electrolyte; LAGP; Mechanical-Testing; Elastic-Modulus; Ultimate-Strength; EIS; Conductivity; Electrical; Thermal; PEO; LiBF4; LiTFSI; Composite

Recommended Citations

Citations

  • Lee, J. J. (2018). Fabrication and Characterizations of LAGP/PEO Composite Electrolytes for All Solid-State Lithium-Ion Batteries [Master's thesis, Wright State University]. OhioLINK Electronic Theses and Dissertations Center. http://rave.ohiolink.edu/etdc/view?acc_num=wright1527273235003087

    APA Style (7th edition)

  • Lee, Jeremy. Fabrication and Characterizations of LAGP/PEO Composite Electrolytes for All Solid-State Lithium-Ion Batteries. 2018. Wright State University, Master's thesis. OhioLINK Electronic Theses and Dissertations Center, http://rave.ohiolink.edu/etdc/view?acc_num=wright1527273235003087.

    MLA Style (8th edition)

  • Lee, Jeremy. "Fabrication and Characterizations of LAGP/PEO Composite Electrolytes for All Solid-State Lithium-Ion Batteries." Master's thesis, Wright State University, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=wright1527273235003087

    Chicago Manual of Style (17th edition)

wright1527273235003087
974
© 2018, all rights reserved.
This open access ETD is published by Wright State University and OhioLINK.