Skip to Main Content
 

Global Search Box

 
 
 
 

Files

File List


Seyed Emad Rezaei.pdf (3.21 MB)

ETD Abstract Container

Abstract Header

Defect Engineering: Novel Strengthening Mechanism for Low- Dimensional Zinc Oxide Nanostructures

Rezaei, Seyed Emad
http://rave.ohiolink.edu/etdc/view?acc_num=wright1532902032338622

Abstract Details

2018, Master of Science in Materials Science and Engineering (MSMSE), Wright State University, Materials Science and Engineering.
The advent of nanomaterials has opened a new avenue for designing and fabricating materials with unique properties, e.g., superior mechanical properties. Based on a common notion, the perfect structures are assumed to exhibit better mechanical properties, such as higher yield strength and Young’s modulus. Therefore, researchers have devoted an extensive amount of time to decrease defect concentration by fabricating materials with the micro/nanoscale, e.g., nanowires (NWs) and nanobelts (NBs), to enhance the mechanical characteristics of the system. However, defects are a part of the fabrication process and precise control over synthesizing procedure is needed to eliminate them from the material. In this work, we showed, with the help of the classical molecular dynamics method, that these inherited defects can be employed as a microstructural feature to improve the mechanical properties of low dimensional nanomaterial, i.e., defect engineering. Our results indicate that the NWs with a high density of I1 stacking faults (I1-SFs) show higher compressive/tensile critical stress (14% increase), as well as Young’s Modulus (37% increase), in comparison to the perfect structure over a wide range of temperature: ranged from 0 K to 500 K. Such an improvement is in agreement with the in-situ experimental measurements of highly defective GaAs NWs, and can be justified by interplay between surface stresses and the intrinsic stress field of locked SFs. The SF-induced stresses are partially relaxed by raising the temperature for this non-trivial strengthening. Moreover, a specific stress relaxation mechanism, twin boundary formation, was found to take place in highly defected NWs, which further postponed the phase transition from hexagonal (HX) to cubic and subsequently boosted the toughness of NWs; this phenomenon appears as a stress plateau in highly defected NWs. Numerous parametric studies on the system variables, such as cross-section geometry, aspect ratio, width, and SF distribution, were performed to find the optimum design. Our results demonstrated the promise and applicability of this strengthening method over a wide temperature range and geometrical features. This novel method, defects engineering, adds a new parameter to the design-space of materials and also paves the way to the fabrication of a new class of materials with superior mechanical properties, including higher stiffness, strength, and ductility.
Hamed Attariani, Ph.D. (Advisor)
Nikolai Priezjev, Ph.D. (Committee Member)
James Menart, Ph.D. (Committee Member)
58 p.
Aerospace Engineering; Materials Science; Mechanical Engineering
Defect engineering; Nanowires; Nanobelts; Zinc oxide; Stacking fault

Recommended Citations

Citations

  • Rezaei, S. E. (2018). Defect Engineering: Novel Strengthening Mechanism for Low- Dimensional Zinc Oxide Nanostructures [Master's thesis, Wright State University]. OhioLINK Electronic Theses and Dissertations Center. http://rave.ohiolink.edu/etdc/view?acc_num=wright1532902032338622

    APA Style (7th edition)

  • Rezaei, Seyed Emad. Defect Engineering: Novel Strengthening Mechanism for Low- Dimensional Zinc Oxide Nanostructures. 2018. Wright State University, Master's thesis. OhioLINK Electronic Theses and Dissertations Center, http://rave.ohiolink.edu/etdc/view?acc_num=wright1532902032338622.

    MLA Style (8th edition)

  • Rezaei, Seyed Emad. "Defect Engineering: Novel Strengthening Mechanism for Low- Dimensional Zinc Oxide Nanostructures." Master's thesis, Wright State University, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=wright1532902032338622

    Chicago Manual of Style (17th edition)

wright1532902032338622
257
© 2018, all rights reserved.
This open access ETD is published by Wright State University and OhioLINK.