Skip to Main Content
 

Global Search Box

 
 
 
 

Files

File List


ucin1352993374.pdf (6.14 MB)

ETD Abstract Container

Abstract Header

Composite Nanoparticle Materials for Electromagnetics

Venkatasubramanian, Rajiv
http://rave.ohiolink.edu/etdc/view?acc_num=ucin1352993374

Abstract Details

2012, MS, University of Cincinnati, Engineering and Applied Science: Mechanical Engineering.
This thesis summarizes the work done toward the fabrication of a novel composite material that is projected as a viable replacement for conventionally used magnetic core materials in various electromagnetic applications. Conventional linear and rotary electric motors, generators and actuators are too bulky to be used in lightweight applications. The major component of weight in electromagnetic devices is the magnetic core, usually made of soft iron. Further, losses due to eddy currents and magnetic remnance occur in soft iron cores. This thesis discusses the different materials suitable that might be to replace soft iron in electromagnetic devices, Methods developed to fabricate different composite cores and their characterization is presented. The composite cores consist of one or more nanoparticle materials consolidated into a polymer or elastomer matrix material. Nanoparticles such as Carbon Nanosphere Chains, Carbon Nano Fibers and Superparamagnetic Iron Oxide nanoparticles were used to fabricate the cores. Superparamagnetic iron oxide nanoparticles were selected as the best among the available materials to achieve optimal core properties needed for electromagnetic applications. As described in this thesis, the ability to control the properties of the cores by varying the types and quantities of the materials used in the process of fabrication is an important advantage over soft iron. A permanent magnet is used to lift the cores to approximately measure the Relative magnetic permeability of the fabricated cores. A Digital Multimeter is used for the measurement of Resistivity of the cores. An Instron Tensile Testing machine is used to determine the strength of the cores. The specific permeability of the superparamagnetic iron oxide powder nanocomposite cores relative to soft iron was measured and the percentage of nanoparticles in the matrix material was increased to increase the magnetic permeability. Superparamagnetic nanoparticles may exhibit higher overall Magnetic Moment compared to paramagnetic materials, and lower core losses compared to ferromagnetic materials, of similar volume fraction. The work documented in this thesis details a process that involves: (i) Nanomaterial Selection, (ii) Matrix Material Selection, (iii) Magnetic Core Fabrication, (iv) Core Material Characterization, and (v) Results Comparison with soft iron. The specific permeability’s of the fabricated nanocomposite material and soft iron were found to be similar when measured using a permanent magnet. The electrical resistivity of the nanocomposite material when compared to soft iron is very high resulting in lower eddy current losses making it suitable for high frequency operations. Future work would consist of testing for superparamagnetic behavior over the entire sample, accurate measurement of the magnetic permeability using a Superconducting Quantum Interference Device (SQUID) or a Vibrating Sample Magnetometer (VSM) and finding ways to improve dispersion of the nanoparticles such as coating the surfaces of individual particles to prevent agglomeration. The nanocomposite core material can then be tested in low and high frequency applications including electric motors, generators, electromagnetic shielding, smart materials, biomedical devices, morphing air foils, switches, sensors and many of the other possibly hundreds of applications that use electromagnetics.
Mark Schulz, Ph.D. (Committee Chair)
Vesselin Shanov, Ph.D. (Committee Member)
David Thompson, Ph.D. (Committee Member)
108 p.
Engineering
Mechanical Engineering; Nanotechnology; Magnetism; Electromagnetics; Composites; Nanoparticles;

Recommended Citations

Citations

  • Venkatasubramanian, R. (2012). Composite Nanoparticle Materials for Electromagnetics [Master's thesis, University of Cincinnati]. OhioLINK Electronic Theses and Dissertations Center. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1352993374

    APA Style (7th edition)

  • Venkatasubramanian, Rajiv. Composite Nanoparticle Materials for Electromagnetics. 2012. University of Cincinnati, Master's thesis. OhioLINK Electronic Theses and Dissertations Center, http://rave.ohiolink.edu/etdc/view?acc_num=ucin1352993374.

    MLA Style (8th edition)

  • Venkatasubramanian, Rajiv. "Composite Nanoparticle Materials for Electromagnetics." Master's thesis, University of Cincinnati, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1352993374

    Chicago Manual of Style (17th edition)

ucin1352993374
825
© 2012, all rights reserved.
This open access ETD is published by University of Cincinnati and OhioLINK.